Metal Nail Art Sculpture: How Masonry Nail Pieces Are Made
Written by Corey Ellis Art Team · 6 min read · Last Updated November 18, 2026
Written by Corey Ellis Art Team · 6 min read · Last Updated November 18, 2026
Stand close to a nail sculpture and you see hardware: rows of square heads, welds left in view, and the small color shifts that heat leaves on steel. Step back and the nails disappear into a single form, a texture that reads almost like woven fabric.
That shift between close and far is what draws collectors to metal nail art. This guide explains what it is, why Corey chose masonry nails, where brass and copper fit, and how to bring a nail piece into your home or project.
Metal nail art sculpture uses nails as the building block instead of sheet metal or cast forms. Each nail is placed and welded by hand, and the piece grows one nail at a time.
The result can be a flat wall panel with a dense nail field, a curved abstract form, or a full figure. The surface is the subject: repetition, shadow, and the way light catches hundreds of small edges.
It is different from string art or pin art, where nails hold something else. In a welded nail sculpture, the nails are the structure and the finish.
Square masonry nails are Corey's signature medium. In his words, he chose them because they stand apart: unique, industrial, and full of character.
Before sculpture, Corey built custom motorcycles and hot rods.
That background shows in the work: clean welds, honest materials, and a builder's respect for how metal behaves under heat. He has been welding sculpture since 2004.
Masonry nails have a squared shank and a heavy head, so they stack in ways round wire nails do not. Massed together, they create a surface with depth and rhythm that is hard to get any other way.
Every piece is welded in the studio. Nothing is cast in editions, nothing is mass produced, and there are no subcontracted welds.
Every sculpture starts with a steel base metal. The base sets the size and shape of the piece and gives the nails something solid to fuse to.
Nails are laid in place and welded one by one. Corey controls the direction, spacing, and density of the nails to build pattern and movement across the surface.
A tight, even field reads calm and architectural. A looser, layered field reads wild and textured.
Color on a nail piece comes from heat and chemistry rather than pigment. Heat from welding leaves natural color shifts on steel, and patinas build on them.
A clear coat seals the surface. For a piece that will live outdoors, Corey adds an additional five or six coats of clear enamel.
Corey's materials include square nails, steel rod, brass, copper, and some polished stainless. Copper and brass are added depending on the design, so not every nail piece includes them.
Brass brings warm gold highlights against dark steel.
It works well as an accent line, a framed edge, or a field of bright points within a darker nail surface. The studio piece "Starry Night" is welded steel and brass, a good example of how brass can carry light across a composition.
Copper adds red and rose tones and takes patina in its own way. Mixed with steel nails, it creates contrast that shifts as you walk past.
If you are looking for brass metal wall art with a handmade surface, a commission lets you choose how much brass appears and where.
Nails adapt to many styles. These are the directions collectors ask about most.
Brutalist work celebrates raw material and visible structure. Dense masonry-nail fields, welded steel panels, and oxidation fit that thinking naturally.
See Corey's brutalist metal sculptures, or read our guide to buying or commissioning brutalist metal sculpture.
Mid-century silhouettes look striking when they are filled with texture.
Starbursts, ovals, and stacked geometric shapes take on new depth with a nail surface and brass accents. Browse Corey's mid-century sculptures for examples.
Abstract work, to Corey, means embracing imperfection and originality. Flowing nail compositions let the material lead, with curves and clusters that change in different light.
Nails can also wrap a full human figure.
Life-size body sculpture is part of the studio's work, and each one is built around a pose and body type agreed with the client. See Corey's custom metal body sculptures.
Most nail art is made for the wall, where light can rake across the surface and show the texture. Freestanding and figurative pieces work in entries, stair landings, and commercial lobbies.
A nail piece carries real weight. Before you choose a spot, read our guide on how to hang a heavy metal wall sculpture and plan the wall with your contractor.
Side light brings out the most detail in a nail field. A wall washer or angled spotlight will show the depth far better than flat overhead light.
Corey's pieces can go outside when the client asks. The extra coats of clear enamel are part of preparing a piece for outdoor display.
If you want something now, check available work, which links to Corey's current listings on Etsy, eBay, and Saatchi.
If you want a piece sized to a wall, matched to a color palette, or built around an idea, a commission is the better path.
Clients often send a rendering, a screenshot of a past piece they would like larger, or a whole new idea. Corey typically sketches the design for the client before work begins.
The full process is on the custom metal sculpture commissions page. Pricing is quoted per project after Corey understands the brief.
A metal nail art sculpture is one of one, built by hand, nail by nail. To talk through an idea, visit Corey Ellis Art and use the commission request form to share your space, your references, and what you have in mind.
Share dimensions, space, and any imagery that inspires the project. Corey reviews every inquiry personally.