Guide

Brass Metal Wall Art: Original Welded Brass and Steel Work

Written by Corey Ellis Art Team · 6 min read · Last Updated November 20, 2026

Brass has a way of catching light. A brass starburst over a credenza or a brass-edged panel in a hallway can warm up a room more than a much larger painting.

That is why brass wall art keeps coming back. Mid-century homes used it, collectors hunt for it, and designers still reach for it when a space feels too cool or flat.

This guide explains how brass works in original welded sculpture, how it differs from the vintage decor pieces you see online, and how to commission a brass piece built for your wall.

Why brass works on a wall

Brass is a warm, golden metal. Next to blackened or raw steel, it reads as a highlight, the way a gold leaf detail lifts a dark frame.

It also changes with light through the day. Morning sun, evening lamps, and overhead lighting each bring out a different tone, so a brass piece never looks quite the same twice.

For rooms with wood floors, leather, walnut furniture, or warm paint colors, brass ties the palette together. In a room full of white and gray, it adds the one warm note the space was missing.

Brass in Corey Ellis sculpture

Corey Ellis is a metal sculptor who specializes in masonry nails, brass, copper, and steel. He has been welding since 2004, and before he turned fully to sculpture he built custom motorcycles and hot rods.

His approach to brass is simple. In Corey's words, "Every sculpture I make starts out with a steel base metal and I add copper and brass depending on the design."

That means brass is a design choice, not a coating. It might be a starburst center, an edge line, a field of accents, or the bright half of a two-tone composition.

Steel base, brass by design

The steel base gives each piece its strength and structure. Brass is then welded into the composition where it does the most visual work.

Some pieces carry a lot of brass. Others use it as a single accent.

Corey's Starry Night, for example, is welded steel and brass.

Brass with nails and copper

Square masonry nails are Corey's signature medium. He chose them because they stand apart: unique, industrial, and full of character.

Brass pairs well with a nail field. The dark, textured nails give the brass something to glow against, and copper can add a third warm tone between them.

To go deeper on the nail side of his work, read metal nail art sculpture: how masonry nail pieces are made.

Hand-welded, never cast

Every piece is hand-welded in the studio. There is no production line and no subcontracted welds.

Nothing is cast in editions, and nothing is mass produced. When a sculpture leaves the shop, it leaves once.

Original brass sculpture vs vintage brass decor

If you search for brass wall art, you will find a lot of vintage pieces: brass birds, branches, sunbursts, and framed panels from past decades. Many of them are charming, and they can look great in the right room.

Original welded work is a different thing. Here is how they compare:

  • Uniqueness. Many vintage decor pieces were made in quantity. An original sculpture from Corey is one of one.
  • Construction. Original work is welded from raw stock on a steel base. Decor pieces are often thin stamped or cast metal.
  • Fit. A vintage piece comes in whatever size it was made. A commission is built for your wall and your scale.
  • Design input. With a commission, you can share references and help shape the piece.

Neither is wrong. If you want a piece that nobody else owns, built for a specific wall, an original commission is the way to get it.

Mid-century and brutalist brass styles

Brass shows up across several of Corey's styles.

Mid-century modern. Atomic starbursts, brass with blackened steel, and sharp lines softened by craft. See the mid-century sculptures collection for examples of this direction.

Brutalist. Heavy, textured steel surfaces with brass used sparingly as a bright break in the mass. The brutalist sculptures collection shows the range.

Contemporary and abstract. Brass lines and planes set against steel and nails for a modern, graphic look.

Caring for brass wall art

Clear coat protects the metal. Corey's guidance on durability is direct: his pieces "all hold up as long as they have clear coat on them."

Brass can go outdoors, too. When a client asks for an outdoor piece, Corey adds an additional five or six coats of clear enamel.

A brass and steel piece can be heavy. Our guide on how to hang a heavy metal wall sculpture covers anchors, studs, and placement.

How to commission a brass metal wall art piece

Commissioning with Corey is personal and done by email. Here is how it usually starts:

  1. Email the basics. Send your wall dimensions, a photo of the space, and a budget range.
  2. Share references. You can send your own rendering, screenshots of a past piece you would like bigger, or a brand new idea.
  3. Say you want brass. Mention how much brass you picture, from a single accent to a brass-forward design.
  4. Review a sketch. Corey typically sketches the design for you. He calls himself low-tech, so expect a hand sketch, not a digital render.
  5. Agree on a price. Every piece is quoted per project. There is no set price list.

Corey reviews every inquiry personally. Start on the custom metal sculpture commissions page or send a note through the contact page.

Prefer something ready now? Original pieces are listed on the available work page and in Corey's shops on Etsy, eBay, and Saatchi Art.

Questions

Frequently asked

Is brass metal wall art from Corey Ellis solid brass?
Every Corey Ellis sculpture starts with a steel base. Brass is welded in where the design calls for it, so pieces are mixed metal with real brass elements rather than plated decor.
Can I ask for more brass in a commission?
Yes. Tell Corey how much brass you picture when you email. He adds copper and brass depending on the design, and your references help guide that balance.
Does brass wall art work in a modern home?
It can. Brass reads as warm and classic, but paired with raw steel and clean lines it fits modern, mid-century, and industrial rooms alike.
Can a brass and steel sculpture go outside?
Yes, if you ask for an outdoor piece. Corey adds an additional five or six coats of clear enamel for outdoor work.
How much does a custom brass sculpture cost?
Corey does not publish a price list. Each piece is quoted per project based on the design. Email your dimensions, a photo of the space, and a budget range to start. Learn more about Corey on the Corey Ellis Art homepage.
Next Step

Start a Custom Artwork Inquiry

Share dimensions, space, and any imagery that inspires the project. Corey reviews every inquiry personally.