How Metal Body Sculptures Are Made, Start to Finish
Written by Corey Ellis Art Team · 6 min read · Last Updated November 22, 2026
Written by Corey Ellis Art Team · 6 min read · Last Updated November 22, 2026
People who search for metal body sculptures usually want to know two things. What will it look like, and how is it actually made?
This post answers the second question in Corey's own terms. If you are ready to plan a piece, our body sculpture commission checklist covers the brief.
A Corey Ellis body sculpture is a human figure, or part of one, built from welded metal. The surface is made of square nails, laid side by side and welded into a single skin.
Every sculpture Corey makes starts with a steel base metal. Copper and brass are added depending on the design.
You can see finished figures on the custom metal body sculptures page.
Life-size figurative work is part of the studio, including large full-body commissions and wire-texture pieces in the spirit of Corey's upside-down Las Vegas sculpture. If you have a full figure in mind, say so in your first email.
Every body sculpture starts as a collaboration. Corey works through three decisions with the client: the pose, the body type, and the gender of the figure.
Sometimes a client sends an image so Corey can get an idea of what they want. A photo of a pose, a gesture, or a past piece is a useful starting point.
Corey describes himself as low-tech. He typically sketches the design out for the client rather than sending a digital render.
The more clearly you describe the figure, the faster the sketch comes together. Our guide on how to choose a metal wall sculpture size helps with the dimensions.
Once the design is agreed, Corey builds the body shape out of chicken wire. Chicken wire is light, it bends by hand, and it holds a curve.
That makes it a practical way to rough out a torso, a hip, or a shoulder line at full scale. The wire form is where the pose first becomes a physical object.
Next, Corey covers the chicken-wire form with plaster of Paris or fiberglass. This turns an open wire cage into a solid surface.
That solid surface is the mold. It carries the anatomy that the metal skin will follow.
Both materials harden over the wire and give a continuous surface to work against. The surface you see on the finished figure is welded metal.
This is the stage that gives Corey's figures their texture. He lays square nails over the mold one by one.
As the nails go down, he welds them together. Nail by nail, the welds build a metal skin that follows every curve of the mold underneath.
Square nails have flat faces and sharp edges. Laid side by side over a curved form, they catch light differently on every plane of the body.
Square nails are one of the core materials Corey offers, alongside steel rod, brass, copper, and some polished stainless. You can see the same nail language in the studio's brutalist sculptures.
Corey specializes in masonry-nail and brass work, and the body figures use that same square-nail surface. For more on the nail side, read metal nail art sculpture: how masonry nail pieces are made.
This step is easy to miss from the outside. Corey welds the nail skin up as a clam shell.
The clam shell lets him separate the sculpture into multiple pieces. He then welds those pieces back together into the finished figure.
Every sculpture starts with a steel base metal, and clear coat is what protects it.
If a client asks whether a piece can be put outside, the answer is yes. Corey adds an additional five or six coats of clear enamel.
In Corey's words, "they all hold up as long as they have clear coat on them." For wall-mounted figures, read how to hang a heavy metal wall sculpture.
A typical commission takes 4 to 12 weeks, not including shipping. Every figure is different, so the exact time depends on the piece.
The stages run in order: design, form, mold, nails and welding, clam shell, and finish.
Payment follows the same steps as every Corey Ellis commission. First, Corey goes over the project with you and you agree on a price.
He then sends an invoice for a 50% deposit, and shipping is included in that deposit. When the sculpture is finished, he sends images of it for your approval, then invoices the remaining 50%.
There is no set price list, and every figure is priced for that one project.
The metal art commissions FAQ covers the wider process.
You do not need a full brief to start. A short email is enough.
Corey works by email and does not offer a public phone number. If the design needs a conversation, he will call you.
When you are ready, start a custom metal sculpture commission or contact Corey.
Share dimensions, space, and any imagery that inspires the project. Corey reviews every inquiry personally.